Push-Button Programmable, Adjustable Time Delays and Multiple Operating Modes
• 100 Hour Lamp Burn-in Timer Mode
• No Field Calibration or Sensitivity Adjustments Required
• No Minimum Load Requirements
• RoHS Compliant"" |
• Occupancy Sensor
• Type Sensor with Self-Contained Single Relay, Small Motion
• Sensor Type Dual Technology
• Voltage Rating 120/277 Volt AC 50/60 Hertz
• Load Type Tungsten/Ballast/Motor
• Load Rating 800 Watt at 120 Volt AC, 1200 Watt at 277 Volt AC (Tungsten, Ballast), 1/4 HP (Motor)
• Area Coverage 12 Foot Radial at 9 Foot Mounting Height, 10 to 20 Foot Radial at 8 to 15 Foot Mounting Height
• Field of View 360 Degree
• Time Delay 30 Second to 20 Minute
• Terminal Type Line Voltage Lead
• Finish Matte White
• Mounting 1-Gang/Octagonal Box, Surface/Ceiling Mount
• Size 4.55 Inch Diameter x 1.55 Inch Depth
• Application Indoor
• Approval UL (Canada and US), UL 916
• RoHS Compliant
• Relay Type Latching
• Current Rating 80 Milliamp at 120/277 Volt AC (Input), 6.67 Milliamp at 120 Volt, 4.3 Amp at 277 Volt (Output)
• Temperature Rating -4 to 140 Deg F
• Relative Humidity Rating 90 Percent (Non-Condensing) |
• RoHS Compliant
• Relay Type Latching
• Current Rating 80 Milliamp at 120/277 Volt AC (Input), 6.67 Milliamp at 120 Volt, 4.3 Amp at 277 Volt (Output)
• Temperature Rating -4 to 140 Deg F
• Relative Humidity Rating 90 Percent (Non-Condensing) |
• The CMR 9 Series Standard Range 360° occupancy sensor incorporates Passive Infrared (PIR) detection technology into an attractive line powered occupancy sensor that provides amazing sensitivity to small motions (e.g. hand movements) and excellent payback. The CMR 9 is an economical solution for providing automatic lighting control where a wall switch replacement sensor is not applicable. With an integrated line switching relay, the CMR 9 is perfect for applications where locating a power pack is difficult, such as retrofitting rooms with concrete or inaccessible ceilings. For rooms with obstructions, the CMR PDT 9 Series sensor is recommended. With optional flash programming via the Sensor Switch VLP mobile device application, the user can easily change time delay, on mode and photocontrol settings. |
